2011 Mercedes-Benz S350 4MATIC BlueTec Diesel

Mercedes-Benz is adding another efficiency-minded model to the S-class lineup by bringing the European S350 diesel to the U.S. for 2011. As configured here, the S350’s 3.0-liter turbo-diesel V-6 will be rated at 241 hp and 429 lb-ft of torque, up from 235 hp and 398 lb-ft for the Euro model. The S350 will be the only full-size luxury sedan offered with a diesel engine in the States.



The U.S.-market S350 will wear BlueTec badges and therefore use AdBlue urea injection to clean up the exhaust. It will be available exclusively with 4MATIC all-wheel drive. The 2011 ML350, R350, GL350, and E350 diesels use a similar turbo-diesel V-6 rated at 210 hp and 400 lb-ft. EPA ratings for the S350 BlueTec aren’t available yet, but the optimistic Europeans rate the S350 at a combined 37 mpg, so high 20s on the highway is a reasonable expectation for EPA tests. It’s sure to be more efficient than the gutsy S550 and S600 and perhaps even better than the S400 hybrid’s 19 city/26 highway mpg ratings.

Power-wise, the S350 will slot in at the bottom of the S-class range, with slightly less horsepower than the hybrid, but with the added bonus of heaps more torque. Expect it to be the slowest S-class, too; Mercedes says the European rear-drive S350 takes 7.8 seconds to reach 62 mph—for reference, we got the S400 hybrid to the 60-mph mark in 7.1 seconds. But Americans picking a diesel likely value other qualities higher than all-out speed.

Pricing is a little harder to pin down. Mercedes says it won’t release official numbers until closer to the model’s launch in the first quarter of 2011. We do know the S350 won’t be a stripper (a relative term with an S-class) and will be available with most of the same packages and equipment as other trim levels.

Broadly speaking, it’s not that surprising to see automakers putting smaller, more efficient powertrains in their luxury machines; witness the availability of six-cylinder engines in the BMW 740i/Li and Porsche Panamera. While a small diesel doesn’t necessarily fit the traditional S-class image in the U.S., it will satisfy eco-conscious buyers and help improve Mercedes’ average fuel-economy figures.
Shell

Subscribe to Car and Driver magazine and carsanddriver

Mercedes-Benz Dresses 2011 S63 AMG Like Classic 300SEL 6.8 AMG

Mercedes-Benz will be releasing its new 2011 S63 AMG this fall and has chosen to dress it up like the famed 300SEL 6.8 AMG endurance racer that once competed in the 24 Hours of Spa.

In 1971, the 300SEL 6.8 AMG took to the track of Spa-Francorchamps in Belgium to prove its mettle in that year's 24 Hours of Spa, and it performed admirably. Facing heavily favored racers including the Ford Capri RS, BMW 2800 CS, Chevrolet Camaro, Opel Commodore, and Alfa Romeo GTA, the 300SEL 6.8 AMG placed second after completing 308 laps around the scenic track, behind a Capri and ahead of a Camaro. The Mercedes recorded few mechanical issues but had to refuel often. Following its second-place finish, the red 300SEL gained international acclaim, especially in its home country of Germany. Mercedes even built 300 replicas in 2006.



To celebrate its 1971 success, Mercedes wrapped its new 2011 S63 AMG with matching sponsor decals, looking to channel the spirit of the old AMG-prepped 300SEL. Debuting in the S-Class is AMG's new twin-turbocharged V-8, a hand-built marvel that is more powerful and less fuel-thirsty than the outgoing 6.2-liter V-8.

After adapting the exterior, the two speedy sedans were sent around Spa for a classic photo shoot, and Hans Heyer (co-driver in 1971) was on hand with his trademark Tyrolean hat. As you can tell from the photos, the sticker placements are impeccable.

Mercedes sedan comparison

300SEL 6.8 AMG

Engine -- 6.8-liter V-8 (6.3-liter for the standard 300SEL 6.3)
Power -- 422 horsepower, 448 pound-feet of torque (247 horsepower, 369 pound-feet of torque for the non-AMG version)
Weight -- 3600 pounds
Top speed -- 165 mph
1971 24 Hours of Spa drivers -- Hans Heyer and Clemens Schickentanz

2011 S63 AMG

Engine -- 5.5-liter twin-turbocharged V-8
Power -- 536 horsepower, 590 pound-feet of torque (563 horsepower, 664 pound-feet of torque with performance package)
Weight -- 4700 pounds (estimate)
Top speed -- 155 mph (186 mph with performance package)

The 2010 24 Hours of Spa will be held July 29 to August 1.

Source: Mercedes-Benz

2011 Mercedes-Benz CLS Preview: Lorinser Previews Tuned Next-Gen CLS

Mercedes-Benz hasn’t even launched its next-generation CLS-Class, but that hasn’t stopped German tuning firm Lorinser from designing a series of cosmetic enhancements for the car.

The new CLS -- which was previewed at the 2010 Detroit auto show with a large sculpture -- is slated to go on sale in 2011, but Lorinser aims to have its own tuned version ready for customers shortly after the launch date. The German tuner already has the bodywork designed, and provided the preview sketch shown above.



According to Lorinser, the body kit is designed to emphasize the new CLS’ masculine and sporty features. A revised front fascia is designed to optimize engine and brake cooling, while swollen fenders allow the tuner to bolt on larger wheels -- we hear the firm plans on offering 21-inch aluminum wheels as an option.

Along with the bodywork, Lorinser will revise the CLS with upgraded chassis, interior trim, and powertrain. We’ve not heard any specifics on any of those improvements, but like any Lorinser product, we imagine the sky -- or the customer’s wallet -- is the limit for modifications.

Lorinser hasn’t detailed exact launch timing for its hopped-up CLS-Class, but noted it will reach dealers in 45 countries -- including the United States -- shortly after the stock version is introduced in 2011.

Source: Lorinser

Brabus Gives Mercedes-Benz SL65 AMG Black Series More Power, More Black Paint

In its search for more power, Brabus created the T65 RS using the Mercedes-Benz SL65 AMG Black Series and endowed it with 788 horsepower and 811 pound-feet of torque.

Starting with an already exclusive SL65 AMG Black Series, Brabus modified the factory twin-turbo 6.0-liter V-12 with some additional components. Two new exhaust manifolds with two new turbochargers were fitted to the twelve-cylinder engine, as were four large intercoolers to really get the air flowing. Feeding out from the engine is a stainless-steel exhaust system with free-flow cats.



To help harness the extra power, the SL65 Black Series was given a new engine electronics package that helps the car meet Euro IV emissions standards. In actuality, maximum torque is rated to an astounding 1047 pound-feet at 2100 rpm, but Brabus chose to electronically limit the car to 811 pound-feet, likely for drivability concerns. Peak horsepower is reached at 5500 rpm.

Unfortunately, extra power doesn't always translate to lower 0-to-60-mph times. We tested the standard Black Series to reach the mark in 3.6 seconds and the T65 RS posts the same number. In other performance figures, the T65 RS hits 124 mph in just 9.8 seconds and is capable of traveling in excess of 206 mph, but is also electronically governed to 200 mph.

As you can tell from the photos, the T65 RS really rides the Black Series name with its matte-black paintjob and darkened wheels. A special carbon-fiber hood scoop, black leather and Alcantara seats, and stainless-steel door sill plates with illuminated Brabus logos add the special German tuner touch.

Pricing has not been revealed, but with a starting price tag of $300,000 for the basic SL65 AMG Black Series, you can bet the T65 RS will command a premium.

Source: Brabus

Vexing Hex: Iranian Designer Pens 6-Wheel Mercedes-Benz Off-Roader

For now, the Unimog remains Mercedes-Benz’s most potent off-road machine -- but we rather like the ideas presented in the design concept crafted by Iranian engineer Siyamak Rouhi Dehkordi.

Dubbed the Mercedes-Benz Hexawheel, the conceptual off-roader utilizes -- of all things -- six wheels. The hallowed portal axles of the Unimog are abandoned in favor of independent suspension at each wheel, but the frame itself is truly interesting.




Like the unusual M561 Gamma Goat military vehicle, the Hexawheel sports a vertically articulated frame, which is hinged around the axis of the center pair of wheels. Dehkordi says the design allows for substantial vertical articulation -- the frame can theoretically travel 28 degrees up and 30 degrees down. A pair of hydraulic rams controls the articulation, provides dampening, and in some instances, work to help push the Hexawheel over large obstacles.

Unlike the Goat, which sported steering on its front and rear axles, the Hexawheel’s rear trailer pivots side-to-side, allowing the 16-foot long vehicle to have an 18-foot turning radius. Further enhancing its prowess off-road is its balanced drivetrain. Dehkordi’s design calls for a diesel-hydraulic drive system, with the engine, pump, and accumulators placed underneath the pickup bed. The fuel tank, located under the cab, helps distribute truck’s 4850-pound curb weight.
We think this is a neat design -- but our only reservation lies with torsion. Long-travel suspension does help traverse obstacles, but when it comes time to twist -- like the Gama Goat does when climbing this hill -- we’d be curious to see how the Hexawheel performs in the real world. Sadly, we think this will remain a digital flight of fancy for the foreseeable future.

Source: Car Body Design

Mercedes-Benz to Style Helicopter Interiors, Yachts, and Furniture

Mercedes-Benz to Style Helicopter Interiors, Yachts, and Furniture
You aren't likely to spot a helicopter parked next to an E-Class  at your local Mercedes-Benz dealer anytime soon, but designers employed within the automaker's styling studios are lending a hand in creating a number of non-automotive products.




We first saw the AMG-branded Cigarette racing boat back in February, but it seems the sleek vessel was just the tip of the iceberg. Daimler revealed today a number of different assignments doled to its designers, ranging from helicopter cabins to luxury yachts and everything in between.

"We are in no way entering into new territory," says professor Gorden Wagener, head of design at Mercedes-Benz Style.  "Our design team has already styled such products such as watches and interiors, as well as numerous products for Mercedes-Benz accessories. Our design division has all of the necessary expertise in more than ample measure, and has benefited from such skills for many years."

As is the case with BMW's Designworks studio, Mercedes-Benz Style can be hired by outside firms to provide design work for future products. Although we'd be a little surprised to see Daimler's stylists penning vehicles that would compete against its own wares, Wagener says the operations has its foundations in land, sea, and air transportation, so anything goes.

Although Daimler itself is no longer attached to the EADS consortium or its Eurocopter subsidiary, M-B's first project was to create the cabin for the new Eurocopter EC145 luxury helicopter. Reportedly inspired by the R-Class crossover, the helicopter has seating for eight, which can be quickly reconfigured or removed to make room for more luggage. Buyers can select from a number of different trim materials and wood patterns, while a three-color ambient lighting system is culled from the S-Class.

Wagener sets no bounds on M-B Style's activities, but does insist clients "must match our premium standards and represent innovation, as well as trend-setting, enduring style." Look for the design operation -- which is comprised of 400 employees from 20 different countries -- to have a hand in many more products in the years to come.

Source: Daimler

2012 Mercedes-Benz SL Will Use More Carbon Fiber

2012 Mercedes-Benz SL Will Use More Carbon Fiber
The SL moniker once stood for sport leicht, but at 4220 pounds, the current 2010 Mercedes-Benz SL roadster is anything but light. That said, the next-generation SL -- due in 2012 -- will be the first of several Mercedes-Benz models to use a substantial amount of lightweight carbon fiber composite materials.




Daimler AG has partnered with Toray Industries, a Japanese textile maker, to develop and produce car parts made from carbon fiber composite materials. The move mirrors BMW’s partnership with U.S.-based carbon fiber supplier SGL Automotive Carbon Fibers, which is designed in part to supply components for the 2013 Megacity electric vehicle. Toray is the world’s largest carbon fiber supplier, and has even supplied Ferrari with carbon fiber for its cars.

Together, Toray and Daimler will work on lightening some of Mercedes’ vehicles through the use of carbon fiber reinforced plastics. Although Mercedes has not disclosed what parts will be made from the material, they’re likely currently made from metal. Carbon fiber parts will therefore significantly reduce the car’s weight, but may carry a substantial cost premium.

Carbon fiber could replace a number of metallic parts, but some suggest the SL’s folding roof may be be fabricated from the material. The current steel roof is rather heavy, and also requires a large hydraulic mechanism to stow and deploy the structure. Using a carbon fiber roof could potentially allow the SL to shed some pounds and utilize a smaller folding mechanism, which could subsequently improve cargo space.

We’ve yet to see finite details on the new SL, but based upon spy photos of the car, it appears the next-gen roadster will bear resemblance to the SLS AMG. In fact, many upcoming Mercedes-Benz models will ape the SLS. According Hans-Dieter Futshik, director of Mercedes’ passenger car design, the SLS will influence the shape of the company’s sports cars, including the SL and SLK.

Source: Autocar, Kilometer Magazine

BMW, Mercedes-Benz Fight to Outsell Each Other in China

BMW, Mercedes-Benz Fight to Outsell Each Other in China
BMW may have outsold Mercedes-Benz globally in 2009, but the two German automakers are both vying to be the biggest luxury brands in the Chinese market.




For the time being, BMW holds that title. Over the past six years, its marketshare in China has grown from 16 to 23 percent, but BMW isn’t resting on its laurels. At the Beijing auto show, CEO Norbert Reithofer announced the company has increased its 2010 sales forecast (which includes BMW, Mini, and Rolls-Royce vehicles) by 20 percent, bumping the total to 120,000 units. In contrast, BMW sold 90,500 vehicles in China in 2009.

New vehicles tailored to the Chinese market -- like the new long wheelbase 5 Series sedan -- will likely help BMW achieve that goal, but the automaker sees the potential to grow over the long term. Reithofer believes his company can build as many as 300,000 vehicles annually in China, thanks in part to an expanded joint venture with Brilliance Automotive Holdings. BMW is expanding its existing plant in Shengyang, which builds the 3- and 5 Series lines, but is also building a second facility, which may build the X1 crossover for the market.

Daimler was a little less forthcoming with specific goals for its Chinese market strategy, but said it simply plans on outselling BMW by 2011. The automaker believes a number of products, designed exclusively for Chinese customers, will help propel it to the top of the sales charts. In addition to launching a new line of heavy-duty trucks for commercial clients, Mercedes-Benz will ultimately launch an electric car co-developed with Chinese automaker BYD, and a long-wheelbase C-class sedan.

Of course, these plans for domination assume another German rival -- Audi -- isn’t able to turn about its fortunes in China. Although it had been the leading luxury brand in the market for the last 20 years, Audi has seen its marketshare slip over the last six years, falling from 66 to 46 percent. Should the firm’s new A8L or the forthcoming A7 fastback resonate with Chinese buyers, BMW and Mercedes-Benz both have their work cut out for them.

Source: Automotive News; 1,2 (Subscription required)